聚丙烯基高分子功能材料吸附卷烟烟气中多种有害成分的应用

为了寻找能同时降低卷烟烟气中甲醛、乙醛、巴豆醛和颗粒物有害成分含量的离子交换树脂吸附材料,采用电镜扫描方法观察聚丙烯基阳离子树脂高分子功能材料的表面特征,应用压汞法分析其平均孔径、中值孔径、比孔容和比表面积,并测试了该材料的交换容量,采用环境试验舱检测法对比测试了该材料和活性炭降低卷烟烟气中甲醛、乙醛、巴豆醛和颗粒物有害成分含量的效果.结果表明,聚丙烯基高分子功能材料表面多斑点状突起,凹凸状明显,微孔和缝隙多,平均孔径为0.26 μm,中值孔径为149.3 μm,比孔容为19.23 cm3/g,比表面积为293.42 m2/g,交换容量为5.16 mmol/g,对烟气中甲醛、乙醛、巴豆醛和颗粒物的净化率分别达到79.6％、79.8％、82.8％和64.7％,而活性炭的净化率分别为20.3％、0、6.4％和54.2％.研究表明,该聚丙烯基高分子功能材料具有物理吸附和化学吸附性能,净化卷烟烟气中多种有害成分的效果明显优于活性炭.     

Spatial allocation of material flow analysis in residential developments: a case study of Kildare County,Ireland

Studies of urban metabolism provide important insights for environmental management of cities, but are not widely used in planning practice due to a mismatch of data scale and coverage. This paper introduces the Spatial Allocation of Material Flow Analysis (SAMFA) model as a potential decision support tool aimed as a contribution to overcome some of these difficulties and describes its pilot use at the county level in the Republic of Ireland. The results suggest that SAMFA is capable of identifying hotspots of higher material and energy use to support targeted planning initiatives, while its ability to visualise different policy scenarios supports more effective multi-stakeholder engagement. The paper evaluates this pilot use and sets out how this model can act as an analytical platform for the industrial ecology–spatial planning nexus.     

Preparation of steel slag porous sound-absorbing material using coal powder as pore former

The aim of the study was to prepare a porous sound-absorbing material using steel slag and fly ash as the main raw material, with coal powder and sodium silicate used as a pore former and binder respectively. The influence of the experimental conditions such as the ratio of fly ash, sintering temperature, sintering time, and porosity regulation on the performance of the porous sound-absorbing material was investigated. The results showed that the specimens prepared by this method had high sound absorption performance and good mechanical properties, and the noise reduction coefficient and compressive strength could reach 0.50 and 6.5 MPa, respectively. The compressive strength increased when the dosage of fly ash and sintering temperature were raised. The noise reduction coefficient decreased with increasing ratio of fly ash and reducing pore former, and first increased and then decreased with the increase of sintering temperature and time. The optimum preparation conditions for the porous sound-absorbing material were a proportion of fly ash of 50% (wt.%), percentage of coal powder of 30% (wt.%), sintering temperature of 1130°C, and sintering time of 6.0 hr, which were determined by analyzing the properties of the sound-absorbing material.     

Determination of 27 pharmaceuticals and personal care products (PPCPs) in water: The benefit of isotope dilution

• Isotope dilution method was developed for the determination of 27 PPCPs in water. • The established method was successfully applied to different types of water samples. • The correction effect of corresponding 27 ILSs over 70 d was investigated. • Benefit of isotopic dilution method was illustrated for three examples. Pharmaceuticals and personal care products (PPCPs) are a unique group of emerging and non-persistent contaminants. In this study, 27 PPCPs in various water samples were extracted by solid phase extraction (SPE), and determined by isotope dilution method using liquid chromatography coupled to tandem triple quadruple mass spectrometer (LC-MS/MS). A total of 27 isotopically labeled standards (ILSs) were applied to correct the concentration of PPCPs in spiked ultrapure water, drinking water, river, effluent and influent sewage. The corrected recoveries were 73%–122% with the relative standard deviation (RSD)<16%, except for acetaminophen. The matrix effect for all kinds of water samples was<22% and the method quantitation limits (MQLs) were 0.45–8.6 ng/L. The developed method was successfully applied on environmental water samples. The SPE extracts of spiked ultrapure water, drinking water, river and wastewater effluent were stored for 70 days, and the ILSs-corrected recoveries of 27 PPCPs were obtained to evaluate the correction ability of ILSs in the presence of variety interferences. The recoveries of 27 PPCPs over 70 days were within the scope of 72%–140% with the recovery variation<37% in all cases. The isotope dilution method seems to be of benefit when the extract has to be stored for long time before the instrument analysis.     

论中国环境预警制度的法治化--以行政权力的规制为核心

环境预警制度蕴含了一项使行政权力合法扩张的"对应性架构",即预警级别与"强制型"或"限制型"措施之间的充分必要关系。在制度运行过程当中,环境行政权力却出现了"选择性失语"和"运动式肆意"的问题,具体表现为:一是预警级别发布时的"隐匿"与"从轻",从而对公民健康权益保护不足;二是预警状态下环境行政权力的扩张过度,使得对个人自由与企业经济自由侵害过度。由于环境治理领域"被害人-加害人"二元对立关系的模糊化、趋同化甚至同一化,传统公法学体系中的权力制约理论无法对预警状态下多样化和多层次性的行政权力进行有效地规制。那么,便有必要对现有的环境预警制度进行修正与纠偏。因此,可以从"对应性架构"的载体及其前后两端入手,对环境预警制度进行法治化建构。具体而言,对环境预警的载体"应急预案"进行形式改造,提高环境应急预案的规范层级,完善环境应急预案制定、修改等程序性规定;明确不同预警级别设定的规范层级,将作为被宪法所保护的客观利益——生态环境利益与经济利益的边界——通过"前端"预警标准予以划分;对预警状态下行政权力的"外部"制约程序予以完善。基于预警级别标准体系的划分,可以通过司法程序对"后端"环境应急预案进行"附带性审查",同时,赋予私主体直接针对预警状态下具有"外化"法效力的内部行政行为提起行政诉讼的诉权。     

屏蔽服冷却系统对人体表面温度影响的研究*

为科学有效地论证多种方式组合的冷却屏蔽服在不同环境条件下对人体表面温度控制的效果，需要对冷却系统及人体敏感部位发热量进行客观评估。通过对5名健康男性的高温测试，探究人体在不同环境温度下体表温度的变化，得出胸部、背部及额头为热量最高部位，并构建以“人体-降温屏蔽服-外界环境”为主体的冷却系统数值模型，对不同环境中的屏蔽服冷却效果展开研究，分析穿戴冷却屏蔽服时人体躯干部分的温度分布及影响。结果表明:在屏蔽服中靠近胸部、背部部位引入相变材料和风扇，均可帮助人体降低体温，提高舒适度。     

构建中国特色非煤矿山安全生产标准体系

为进一步完善我国非煤矿山安全生产标准体系，基于中美非煤矿山标准体系现状研究，分析我国非煤矿山标准体系存在的问题，并基于我国国情探讨构建中国特色非煤矿山安全生产标准体系的重要意义；明确构建中国特色非煤矿山安全生产标准体系的总体思路，立足于顶层设计，全面阐述中国特色非煤矿山安全生产标准体系结构“横向”与“纵向”的要求。结果表明:从规划、管理、制度、投入等方面制定保障措施，可为我国非煤矿山标准体系建设的科学合理发展指明方向。     

煤矿水害风险量化评价方法

为提高煤矿防治水管理水平，预防和消除矿井水害，在层次分析法的基础上建立中性值作为参照对象对矿井水害风险进行实时评判的方法。根据《煤矿防治水细则》建立以矿井水文地质类型、矿井涌水量标准分数、突水预兆、采掘面位置、探水结果为准则层的层次结构模型，并对各评价指标赋权。依据制定的水害风险评价指标的评分细则和监测监控数据并结合其权重得到水害评价总得分。通过总得分与中性参照分数比较得出预测结果:水害评价总得分大于中性参照分数，证明水害的威胁小，分数越高越安全；反之则水害的威胁较大，分数越低越危险，这时需要加强防治水的力度，令评价分数管控大于中性参照分数。这种方法依赖于井下监测监控数据进行量化评价，能实时、客观、全面且准确地反映煤矿水害的风险情况。     

我国污染场地土壤石油烃环境质量标准体系的现状与趋势

石油烃污染场地已经成为国内外重点关注的工业污染场地类型之一。国内基于人体健康风险的污染场地管理模式及分层次评估方法已经展现雏形,为风险管理者提供了基于人体健康的土壤石油烃风险筛选值和管制值,也为污染场地的防治与修复工作提供了决策支持。在前人研究的基础上,梳理了国内土壤环境质量标准体系的建立与发展历程,分析了石油烃类污染物检测方法的现状与未来发展趋势,并着重对比与分析了各标准制订的石油烃及其指示化合物的风险评估筛选值。目前面临的关键问题:①完善石油烃监测指标体系及分析方法是精准获得风险评估结果的前提。现有石油烃馏分指标划分较为宽泛,有必要参考国外先进标准体系,逐渐完善石油烃馏分指标划分及其配套的定量分析方法。②新颁布的国家建设用地土壤污染风险管控标准在前期场地调查中具有一定的普遍适用性,但是考虑到地域建筑物参数、人群暴露参数等的差异性,在后期场地调查中还需要因地制宜地制定适合污染场地的具体修复目标值,并针对关键性参数作定量化解析。     

动态校准仪臭氧间接传递技术

对5台主流动态校准仪开展臭氧间接传递技术研究,对动态校准仪的准确性、可靠性、稳定性及臭氧传递的线性方程等性能参数进行了实验室考察。总体而言,发生型动态校准仪和分析型动态校准仪均可用于臭氧传递工作中。分析型动态校准仪可直接进行臭氧传递,发生型动态校准仪在臭氧传递前必须进行预校准。建议至少每3个月对发生型动态校准仪进行1次臭氧传递,每6个月对分析型动态校准仪进行1次臭氧传递。